When buying a machine, it is known that there will be issues of great concern to customers. And we, as a professional Tenebrio Molitor sifter manufacturer and supplier, will encounter a variety of customer concerns in the process of communication and exchange with customers. These are common questions, now summarized below, hope to bring you help.
Q: Are there any wearing parts for the mealworm sifter?
A: The wearing parts are brushes and conveyor belts. The brushes cost RMB 55/pc, and the conveyor belt costs RMB 190/pc. Only 4 screens and bags are shipped.
Q: What is the role of the inverter?
A: 
Read the inverter volume, and the wind volume is adjustable. The higher the value, the greater the wind power.
Q: How to dry Tenebrio molitors?
A: Drying mealworms must use the mikrodalga kurutucu. Other ways of drying will make mealworms discolored. Because the protein is high, the Tenebrio Molitor will become black. If you do not care about the color, other drying methods can be used.
Q: How much is the fineness of 2 layers of the screen for the 4th generation Tenebrio Molitor sifter?
A: The 4th generation machine has only two layers of sieves. The upper layer of the original one has 26 meshes (with one sieve having 40 mesh). There are large and small screens, equipped with 1 nymph sieve, a net distance of 3.5 mm. All sieves can be replaced at any time, but also for users to customize other mesh sieves. The hourly production of fresh insects is 75-150 kg.
Q: How long do brushes and conveyor belts normally last?
A: About two years.
Q: What size about the 5th generation Tenebrio Molitor sifter machine?
A: Package size: length 164cm, width 75cm, height 121cm, weight 295kg.
Precautions during Operation
When using the Tenebrio Molitor sifter machine, users must pay concerns to several places in the process of use:
- The correct operation of the inverter: the frequency index is best not less than 30hz. When not using the fan, press the red stop button on the control board. Turn the knob smaller and don’t mistakenly think that shutdown. Otherwise, the inverter and fan and low current operation will be easy to burn.
- Because of the export near the ground, the outlet(located in the lower pupa sieve) for dead insects and small nymphs is very easy to block. The machine should be cleaned at any time during the work. Otherwise, it will cause a large number of chrysalis sieve silt within the sieve and block the internal brush, even break the chain, making maintenance or replacement difficult.
